Arduino Summer Camp: LED waves

LED waves Now that you learned to control one LED let's try controlling ten. For this project we will connect 10 LED's to the Arduino and light them up in a sequence, making a wave. Parts: An Arduino. 10 LED's. 10 1k resistors. A breadboard. Wiring Connect all the Ground pins of the LED's to … Continue reading Arduino Summer Camp: LED waves

Arduino Summer Camp: Blinking an LED

Blinking an LED We'll start with the most basic project: blinking an LED. Parts: An Arduino. An LED. A 1k resistor. Wiring Connect the positive (power) pin of the LED to pin 13 on the Arduino through a 1k(1 kilo-ohm) resistor, and connect the negative (ground) pin of the LED to the ground pin of … Continue reading Arduino Summer Camp: Blinking an LED